耐低温柔性扁电缆，用于起重机和输送机

应用领域
ANBF1731带屏蔽,主要在室内用作控制和信号用电缆，用于起重机和输送机以及移动机器部件。铜丝单芯屏蔽和每组芯线单独屏蔽使该电缆能适用于需要电磁兼容的区域。相较于圆电缆，其紧密铺设的屏蔽芯线能够大幅减小弯曲半径。ANBF1731 可以安装在干燥和潮湿的房间。外护套较其耐油，脂，酸和碱。
application
ANBF1731 shielded is suitable indoors as a control and ** cable for cranes and conveyors as well as for moving machine parts. The copper shielded single or respectively bundled cores make this cable ideally suited for use where considerable demands on electromagnetic compatibility (EMC) are made. The closely packed shielded cores or bundles enable it to achieve a much smaller bending radius in comparison to round cables. ANBF1731 can be installed in dry and damp rooms. The outer sheath is extensively resistant to oil, fat, acid and lye.

构造
裸铜丝多股精绞，PVC芯线绝缘，芯线符合DIN VDE 0293 308部分标准,6芯及以上黑色芯线带连续白色数字编号和绿黄保护接地导线。芯束带镀锡铜丝绕包屏蔽。外护套材料为耐低温柔性 PVC，阻燃(符合 DIN EN 60332-1-2 VDE 0482 332-1-2:2005-06 部分标准)。外护套颜色为黑色。
construction
Fine strands of bare copper wire, PVC core insulation, cores acc. to DIN VDE 0293 part 308, to 6 cores are black with consecutive white numbering and greenyellow protective conductor. Cores resp. bundles shielded with tinned copper shield
bandage underneath and above the shield. Other sheath out of cold-?exible PVC, ?ame retardant (acc. to DIN EN 60332-1-2VDE 0482 part 332-1-2:2005-06). Colour black.

技术数据 / technical data

额定电压 / rated voltage: 	
300/500 V
测试电压 / test voltage: 	
3.000 
导体绞合方式 / conductor stranding: 

纯铜绞合 / fine copper strands,符合 / acc. to DIN VDE 0295, 5 类或 6 类标准 / class 5 or 6

绝缘阻抗 / insulation resistance: 
min. 20 MOhm x km

温度范围 / temperature range: 


固定安装 / fixed installation: 
-30° C 至 /to +70° C
移动应用 / ?exible application:

-5° C 至 /to +70° C

弯曲半径 / bending radius: 

电缆厚度 d / for cable thickness d:
移动应用 / ?exible application: 20 x d

符合标准 / approvals:

符合 / acc. to       DIN VDE 0250, 0285